Holux M1000 Bluetooth GPS Receiver

Holux M1000 Bluetooth GPS with MTK 32 GPS engine. The advantages of the Holux M-1000 include best tracking and most importantly affordable. With the advanced technology, the HOlux M-1000 tracks up to 32 satellites at a time, re-acquires satellite signals in 100 ns and updates position data every second. Trickle-Power allows the unit operates a fraction of the time and Push-to-Fix permits user to have a quick position fix even though the receiver usually stays off. The Holux M-1000 comes with integrated rechargeable Li-Ion battery with 850mAh capacity that lasts up to 17 hours.

Features:

Built in MTK MT3318 Low power consumption GPS chipset.
32 parallel satellite-tracking channels for fast acquisition and reacquisition.
Superior sensitivity up to -159 dBm.
Built-in WAAS/EGNOS Demodulator without any additional hardware. Or use the high-sensitive software to get the fast acquisition and reacquisition in the urban, canyon and foliage environments.
Compatible with Bluetooth Serial Port Profile (SPP) completely.
Low power consumption. Built-in rechargeable and changeable Lithium-ion battery, the working time can last 23 hours maximum.
Provide expand terminal contact to other system without Bluetooth device.
Support NMEA0183 V 3.01 data protocol.
3 color-LEDs indicate to show the status of device.
FLASH based program memory. New software revisions upgradeable through serial interface.
Small, sleek, and lightweight design easily fits in your hand.
Over-Temperature protection
Enhanced algorithms -SnapLock and SnapStart provide superior navigation, performance in urban, canyon and foliage environments.
For Car navigation, Marine navigation, Fleet management, AVL, Personal navigation, and Mapping device application.

Basic Specification

Chipset:MTK MT3318 chipset.
Channels: 32 parallel satellite-tracking channels.
Frequency: 1575.42 MHz
Receiver: L1, C/A code.
Acquisition Time (refer to MTK chip specification)
Reacquisition: 0.1 second.
Cold start: < 36 seconds.
Warm start:< 33 seconds.
Hot start: < 1 second

Receiver Accuracy

Normal: < 3 meters CEP without SA.
Enable EGNOS or WAAS:
Position:< 2.2 meters, horizontal 95% of time < 5 meters, Vertical 95% of time
Velocity: within 0.1 meters / second
Time: 0.1 microsecond synchronized GPS time

Use Limitation

Altitude: < 18,000 meters (60,000 feet)
Velocity: :< 515 meters/ second (1000Knots)
Acceleration: 4 G.
Jerk: 20 meters / second3, max

Power Supply

External Voltage: 5VDC +/-5%
Batteries:
Main Power: Built-in rechargeable Lithium-ion for system power.
Backup Power: Rechargeable Lithium-ion battery for memory backup.
Working voltage: 40~50mA (Normal mode).
35mA (Power Saving).
Auto Power Saving mode.
Circuit protection on M-1000 when over-temperature condition - 50 occurs.

Output and Interface

Output protocol
Baud Rate: 38400 bps
Data bit: 8
Parity: No
Stop bit: 1

Format:

NMEA0183 V3.01: GPGGA (1time/1 sec), GPGSA (1 time/5 sec.), GPGSV (1time /5 sec.), GPRMC (1time /1 sec.), GPVTG (1 time/1 sec), (GLL, or MTK NMEA Command for optional).
Datum: WGS84.

Input/ Output Interface:

Compatible Bluetooth Serial Port Profile (SPP), Version1.2 and class 2(up to 10 meter range).
In/Out Port. GPS signal (Out)/Command(In) with CMOS Level?Mini USB Type B Connector and Cable option:
GR230-A2 (USB data cable)

Physical
Size: 65 × 43 × 17.6 mm
Weight: < 53 g
Operating Temperature:-10 to + 60 (under the un-charging condition); Charging Temperature: 0 to + 45
Storage Temperature:-20 to + 60
Operating humidity: 5% to 95% No condensing

Other Functions

Bluetooth frequency: 2.4 ~2.48GHz
Bluetooth Input Sensitivity: -85dBm
Low sensitivity of receiving satellite signal : -159 dBm
LED Functions: Indicate Bluetooth status, GPS status, Battery Status and Battery charging status

In the Box
M-1000 Bluetooth GPS Receiver x 1
Car Cigarette adapter x 1
User guide and Driver CD x 1
M-1000 Quick Guide x 1